20 December 2008

Wireless Scanning – Wardriving / Warchalking

What is wireless scanning?

Wireless scanning is a method to find an available wireless network access point. It allows you to identify wireless networks through the use of WNIC (wireless network interface card) running in promiscuous mode and a software that will probe for access points. Once an open wireless access point is found, the wardriver usually maps it, so at the end he would have a map of access points with their properties (SSID, WEP, MAC etc.). Whenever the attacker wants to return into the network, he/she usually logs packets for later analysis, or to run them though a WEP key cracker when a weak key is being used.

There are many different types of wireless scanning. The most known and used scanning method is Wardriving, next comes Warchalking. There are many other methods such as Warstrolling, Warflying etc., however this articles deals with Wardriving and Warchalking only.

Why “War”?

The term “war”, which is used in Wardriving, Warchalking etc., was taken from the old days of WarDialing. WarDialing, the hacking practice of phoning up every extension of a phone network until the number associated with a modem is hit upon, has been replaced by WarDriving with the introduction of wireless LANS.

WarDriving – Let’s take a drive…

Wardriving is the first and well known method used to find available wireless networks (means unsecured). It is usually done with a mobile device such as a laptop or iPaq. Wardriving scanning is accomplished in an easy way: the attacker takes the device with him/her into a car, and detects networks (NetStumbler for Windows, BSD-AriTools for BSD, and airsnort for Linux). Once an open access point is detected, the attacker maps it, explores, or stumbles into a pipe to the internet.

The equipment necessary to WarDrive is: A wireless network interface card (PCMCIA), a device capable of locating itself on a map (GPS, not always necessary), a laptop or any other mobile device, Linux Red Hat or Debian (Windows is not recommended), Wireless tools (WEPCrack, AirSnort etc.).

The equipment is all off the shelf and pretty inexpensive.

WarChalking – The hobo language

“Now a new "language" is developing, WarChalking. The idea is based on the "hobo symbols" and is there to tell persons on the street where there is an open wireless network node, and what the settings are. It may look like incomprehensible squiggles, and most people would walk past thinking it is odd graffiti, but it conveys a lot of info that is understood by the hackers. Furthermore, it is now being adopted by those that are sharing networks voluntarily as a way to give the info out to the community." – Zig

WarChalking was conceived by a group of friends in June 2002, and published by Matt Jones.

WarChalking is simply drawing a chalk symbol on a wall or pavement to indicate the presence of a wireless network, so that other can easily notice it and the details about it. WarChalking is a the modern version of the hobo sign language, which was used by low-tech kings of the road to alert each other to shelter, food and potential trouble. The chalks symbols are nothing more than giving a visual cue to of a wireless network.

The following are the WarChalking symbols:

Symbol Key

SSID Open Node

SSID Closed Node

WEP Node SSID Access Contact
( W )

Example for a WarChalking symbol:


This symbol indicates a open node with SSID “Retina” and bandwidth equal to 1.5MBps.

With the use of these symbols, wardrivers can a lot about the node, and whether this is a worth network. Anyone initiated in the ways of WarChalking will recognize what it means, and get online.

Securing WLANs

Securing a wireless network is much simpler than securing a wired network. Building a secure wireless network can be done within few steps. So, you ask yourself “why then it’s easy to break into a wireless network?” the answer is very simple. Whenever a company wants to connect their employees wirelessly into the company network, the administrators often forget to change the default settings of a router, firewall, access point, enabling WEP and more.

Further more, far too many systems administrators forget that the wireless network extends beyond the walls of a building. There may be security guards at the door, and firewalls on the fixed cable network, but the wireless back door is wide open.

The Wireless network security issues are not discussed in this article. WLANs security issues were discussed in my previous article “Wireless Security & Hacking”.

Links & Sources

http://www.wifimaps.com - Map server listing wireless access points.

http://www.kraftvoll.at/software/index.shtml - GPS driving software for Linux.

http://www.kismetwireless.net - Wireless console bases sniffer. It supports GPS and has a lot of features.

http://airsnort.shmoo.com - Wireless GUI sniffer for breaking WEP keys.

ftp.cs.pdx.edu/pub/mobile - FreeBSD WScan

http://www.blackbeltjones.com/warchalking/warchalking0_9.pdf - WarChalking Symbols

http://wepcrack.sourceforge.net - WEPCrack – Linux

http://www.blackalchemy.to/Projects/fakeap/fake-ap.html - Fake AP - Linux

http://prismstumbler.sourceforge.net/ - PrismStumbler – Linux

http://www.bastard.net/~kos/wifi/ - SSID Sniff – Linux

http://www.techm.com/font2.html - Hobo Symbol Type Font